Are you looking for great employees? Take advantage of BAMA’s free job listing service and post your job openings now! Just click here to send us your ad. Postings will automatically be deleted after 60 days. Current Openings SEAL DYNAMICS A subsidiary of HEICO Aerospace Manufacturing Engineer Location: US-FL- Tampa Job Category: Manufacturing Engineer Status: Full Time, Employee Education Level: BS (Preferred) Shift: First Shift (Day) Job Description: Manufacturing Engineer This position will work within the Seal Dynamics’ New Product Development Group performing various tasks associated with engineering, quality assurance, manufacturing and vendor management in the development of aircraft components. The aircraft components are being developed for the commercial airline aftermarket and they are manufactured in locations throughout the US and internationally. This position reports to the Director of Engineering and has strong growth potential within the engineering organization. Primary Responsibilities: • To assure that our suppliers consistently provide quality products on time, making sure manufacturing processes and quality procedures are in place and are followed. • Lead the team in resolving supplier manufacturing and quality related issues • Assist and educate suppliers to understand the requirements of Seal Dynamics and the FAA • Create and implement inspection criteria and procedures in conformance to QS9000/ISO9002 standards to include Advanced Product Quality Planning (APQP) process • Evaluate supplier manufacturing capabilities and conduct supplier audits for manufacturing processes and quality control • Act as liaison between vendors and SD’s Quality Assurance and Engineering departments in the production and vendor inspection of parts. • Maintain suppliers’ manufacturing process travelers once approved by SD’s Engineering and Quality Assurance • Support New Product Development activities as needed Requirements for Position: • Bachelor’s degree in Engineering, Material Sciences, Manufacturing or equivalent experience in relevant manufacturing and materials and processing experience • A minimum of 7 years of experience in manufacturing processes for metallic and non metallic aerospace materials including, coatings, processes and finishes • Detailed understanding of drawings including Geometric Dimensioning and Tolerances • Proficient in the use of inspection gauges and test equipment • Proficient in the use of Microsoft Word and Excel • A high attention to detail with a strong work ethic • Must be proficient in handling multiple tasks in a fast paced environment • Must have excellent organizational, analytical, and communication skills Send resume and cover letter via e-mail to JeffreyPerkins@SealDynamics.com Jeffrey Perkins Vice President of Product Development Seal Dynamics, a Division of Heico Aerosace 13780 McCormick Drive, Tampa, FL 33626 Web Sites: www.heico.com & www.sealdynamics.com ___________________________________________________________________ SEAL DYNAMICS A subsidiary of HEICO Aerospace QUALITY INSPECTOR Location: US-FL- Tampa Job Category: Manufacturing Engineer Status: Full Time, Employee Education Level: Tech School or BS Shift: First Shift (Day) Job Description: Manufacturing Engineer ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform assigned tests on materials and parts, product in process, and finished product Inspect visually for obvious defects Compare results with quality standards Report inspection and test results to Quality Manager Identify defectives and segregate from acceptable product Notify Quality Manager and Program Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted Record results on inspection forms or charts and report number of defects found Post and maintain forms and charts of inspection data, quality levels, or special quality studies as required Makes recommendation on disposition of suspect/defective product to Quality Manager Support the quality record retention requirements by assisting with filing and maintenance of Quality Records EDUCATION and/or EXPERIENCE: Two years Technical school education or 3 years of experience as an inspector American Society for Quality Certified Mechanical Inspector a plus Use inspection gauges and test equipment Knowledge of CMM operation Knowledge of ISO 9000 Quality Systems Knowledge of calibration requirements/procedures Knowledge of Geometric Dimensioning & Tolerance (GD&T) Blueprint Reading Continuous Improvement Techniques Inspection Points (e.g. receiving, in-process, final, source, first article) Sampling (AQL levels, sampling tables) Internal Auditing Techniques desired, but not required Proficiency with computer based applications, Microsoft Office, and Access as a minimum LANGUAGE SKILLS: Need the ability to communicate effectively with both employees and managers. MATHEMATICAL SKILLS: Need the ability to comprehend and apply basic mathematics. REASONING ABILITY: Need the ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee must occasionally lift and/or move up to 10 pounds and occasionally lift/and or move up to 50 pounds. Specific vision capabilities are required for this job to perform tasks typically associated with inspection processes. WORK ENVIRONMENT: The work environment characteristics can be described at as that of a typical office environment.

Are you looking for great employees? Take advantage of BAMA’s free job listing service and post your job openings now! Just click here to send us your ad.

Postings will automatically be deleted after 60 days.

Current Openings

SEAL DYNAMICS

A subsidiary of HEICO Aerospace

Manufacturing Engineer

Location: US-FL- TampaJob Category: Manufacturing Engineer

Status: Full Time, EmployeeEducation Level: BS (Preferred)

Shift: First Shift (Day)

Job Description: Manufacturing Engineer

This position will work within the Seal Dynamics’ New Product Development Group performing various tasks associated with engineering, quality assurance, manufacturing and vendor management in the development of aircraft components. The aircraft components are being developed for the commercial airline aftermarket and they are manufactured in locations throughout the US and internationally.

This position reports to the Director of Engineering and has strong growth potential within the engineering organization.

Primary Responsibilities:

•To assure that our suppliers consistently provide quality products on time, making sure manufacturing processes and quality procedures are in place and are followed.

•Lead the team in resolving supplier manufacturing and quality related issues

•Assist and educate suppliers to understand the requirements of Seal Dynamics and the FAA

•Create and implement inspection criteria and procedures in conformance to QS9000/ISO9002 standards to include Advanced Product Quality Planning (APQP) process

•Evaluate supplier manufacturing capabilities and conduct supplier audits for manufacturing processes and quality control

•Act as liaison between vendors and SD’s Quality Assurance and Engineering departments in the production and vendor inspection of parts.

•Maintain suppliers’ manufacturing process travelers once approved by SD’s Engineering and Quality Assurance

•Support New Product Development activities as needed

Requirements for Position:

•Bachelor’s degree in Engineering, Material Sciences, Manufacturing or equivalent experience in relevant manufacturing and materials and processing experience

•A minimum of 7 years of experience in manufacturing processes for metallic and non metallic aerospace materials including, coatings, processes and finishes

•Detailed understanding of drawings including Geometric Dimensioning and Tolerances

•Proficient in the use of inspection gauges and test equipment

•Proficient in the use of Microsoft Word and Excel

•A high attention to detail with a strong work ethic

•Must be proficient in handling multiple tasks in a fast paced environment

•Must have excellent organizational, analytical, and communication skills

Send resume and cover letter via e-mail to JeffreyPerkins@SealDynamics.com

Jeffrey Perkins
Vice President of Product Development
Seal Dynamics, a Division of Heico Aerosace

13780 McCormick Drive, Tampa, FL 33626

Web Sites: www.heico.com & www.sealdynamics.com

___________________________________________________________________

SEAL DYNAMICS

A subsidiary of HEICO Aerospace

QUALITY INSPECTOR

Location: US-FL- TampaJob Category: Manufacturing Engineer

Status: Full Time, EmployeeEducation Level: Tech School or BS

Shift: First Shift (Day)

Job Description: Manufacturing Engineer

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Perform assigned tests on materials and parts, product in process, and finished product

Inspect visually for obvious defects

Compare results with quality standards

Report inspection and test results to Quality Manager

Identify defectives and segregate from acceptable product

Notify Quality Manager and Program Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted

Record results on inspection forms or charts and report number of defects found

Post and maintain forms and charts of inspection data, quality levels, or special quality studies as required

Makes recommendation on disposition of suspect/defective product to Quality Manager

Support the quality record retention requirements by assisting with filing and maintenance of Quality Records

EDUCATION and/or EXPERIENCE:

Two years Technical school education or 3 years of experience as an inspector

American Society for Quality Certified Mechanical Inspector a plus

Use inspection gauges and test equipment

Knowledge of CMM operation

Knowledge of ISO 9000 Quality Systems

Knowledge of calibration requirements/procedures

Knowledge of Geometric Dimensioning & Tolerance (GD&T)

Blueprint Reading

Continuous Improvement Techniques

Inspection Points (e.g. receiving, in-process, final, source, first article)

Sampling (AQL levels, sampling tables)

Internal Auditing Techniques desired, but not required

Proficiency with computer based applications, Microsoft Office, and Access as a minimum

LANGUAGE SKILLS:

Need the ability to communicate effectively with both employees and managers.

MATHEMATICAL SKILLS:

Need the ability to comprehend and apply basic mathematics.

REASONING ABILITY:

Need the ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee must occasionally lift and/or move up to 10 pounds and occasionally lift/and or move up to 50 pounds. Specific vision capabilities are required for this job to perform tasks typically associated with inspection processes.

WORK ENVIRONMENT:

The work environment characteristics can be described at as that of a typical office environment.

Employment Opportunities