Seal Dynamics – N.P.D.G.
13780 McCormick Drive
Tampa, FL. 33626
|
Section No.
|
SDQA-001A
|
Issue Date:
|
01/2017
|
Revision Level:
|
IR
|
Revision Date:
|
N/A
|
FLSA Status:
|
Non-Exempt
|
JOB TITLE: QUALITY ASSURANCE INSPECTOR I
|
Dept: Quality
|
Salary Grade: N/A
|
Reports to: Quality Manager
|
SUMMARY:
The Quality Assurance Inspector will perform routine checks, tests, gauging, and instrument inspections of materials, goods in process, and finished goods.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
· Perform assigned inspections on parts, product in process, and finished product
· The ability to use a CMM (Coordinate Measuring Machine) for acceptance of product is preferred.
· Inspect visually for obvious defects
· Compare results with quality standards
· Report inspection and test results to Quality Manager
· Identify defectives and segregate from acceptable product
· Notify Quality Manager and Program Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted
· Record results on inspection forms or charts and report number of defects found
· Post and maintain forms and charts of inspection data, quality levels, or special quality studies as required
· Support the quality record retention requirements by assisting with filing and maintenance of Quality Records
· Assist with scrap processing and removal of test and product samples as required
· Work alternate shifts and/or overtime as required
· Adhere to all Seal Dynamics, Quality & Safety Procedures
· Other duties as assigned
SUPERVISORY RESPONSIBILITIES:
None
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE:
· High school graduate or equivalent
· Blueprint Reading
· Proficiency with computer based applications, Microsoft Office and Excel as a minimum
· American Society for Quality Certified Quality Inspector a plus
· Experience with inspection gauges and test equipment preferred
· Knowledge of ISO 9000 Quality Systems preferred
· Knowledge of Geometric Dimensioning & Tolerancing (GD&T) a plus
LANGUAGE SKILLS:
Need the ability to communicate effectively with both employees and managers.
MATHEMATICAL SKILLS:
Need the ability to comprehend and apply basic mathematics.
REASONING ABILITY:
Need the ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee must occasionally lift and/or move up to 10 pounds and occasionally lift/and or move up to 50 pounds. Specific vision capabilities are required for this job to perform tasks typically associated with inspection processes.
WORK ENVIRONMENT:
The work environment characteristics can be described at as that of a typical office environment.
Please, no phone calls or faxes will be accepted. Seal Dynamics is proud to be an EEO/AA/V/H employer. For additional information about Seal Dynamics visit us online at www.sealdynamics.com.